Maintenance methods for oil press

Five steps of oil press maintenance methods

  What should you pay attention to when using the oil press? How to use it to extend the service life of the oil press? Today I will explain to you the five steps of oil press maintenance.

1. The fuel tank must be kept clean. The fuel tank must be cleaned every 3 months or so and replaced with new oil, or the oil in the tank must be taken out and filtered before use. Impurities in the oil will cause wear of the oil pump and blockage of the oil circuit, affecting the operation of the soybean oil press.

2. The pressure oil in the oil pump must be filtered, and the concentration should not be too high. It is best to use rapeseed oil, soybean oil, peanut oil, etc. It is forbidden to use gasoline, kerosene and other flammable fuels.

3. The connecting pin between the handle and the oil pump should be lubricated regularly to reduce wear.

4. The oil press should be installed indoors to avoid being exposed to wind and rain in the open air, which may cause rust and cooking oil pollution.

5. When parking for a long time, the machine must be cleaned, oiled, and covered with a protective cover.